×

Z-Wave Zniffer User Guide

消耗积分:2 | 格式:pdf | 大小:1271KB | 2014-05-04

LifeRD

分享资料个

Deｓｃｒｉｐｔion of the Z-Wave Zniffer development tool used for detecting RF communication in a Z-Wave network. The tool is used during SW application development for debugging etc.

　　The Z-Wave Zniffer application is a development tool for capturing Z-Wave RF communication and presenting the frames in a graphical user interface on a PC. The tool shows the node ID of the Source and Destination for the communication， the type of frame ［2］ being sent， and the application content， i.e. the specific command， which is being sent. The Zniffer tool listens passive to the Z-Wave network traffic， and will only display the RF communications taking place within direct RF range. Be aware of that Zniffer can occasionally miss RF communication even from Z-Wave nodes within direct range

下载并关注上传者 开通VIP，低至0.08元下载/次

声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉

评论(0)
发评论

下载排行榜

全部0条评论

快来发表一下你的评论吧 !