×

在电路仿真器提供先进的单片机的问题分析和系统评价

消耗积分:0 | 格式:rar | 大小:0.16 MB | 2017-06-16

分享资料个

  在电路仿真器提供先进的单片机的问题分析和系统评价

  在电路仿真器(ICES)是有效的工具,提供单片机设计师的能力和运动的硬件调试代码。在过去,这些是大型的、昂贵的、复杂的工具,这些工具往往很难学习和使用。他们带着他们自己的脐带连接,实际上取代了目标板上的微控制器,并提供了一个封装的版本,允许增加实时控制的包装。

  随着表面贴装器件的普遍使用,这已不再是可行的方法。几乎每一个微控制器供应商都支持系统编程,以及调试和仿真功能。集成到今天的微控制器中的调试硬件,再加上使用USB和JTAG等调试串行总线,使设计工程师能够以较少侵入性和低成本的方式测试固件和硬件。让工程师访问所有内部MCU资源也缩短了市场周期的关键时间。

  本文讨论了一些用于调试和开发嵌入式系统的微控制器调试和测试系统和方法,它们执行ICE和ICE之类的功能。

  

  Legacy facelift

  As design engineers can attest, an MCU can remain truly backward compatible while still undergoing feature enhancements and performance improvement. One legacy architecture receiving some silicon surgery was the Atmel AT89C51 family. Based around the older but still quite popular 8051 architecture, these parts have added modern peripherals like CAN, USB, SPI, and smart-card interfaces. In addition, larger amounts of Flash and RAM (up to 128 K and 8 K), and mixed signal functionality (10-bit A/D converters) have enabled these older architectures to meet current design requirements.

  Key to their continuing utility is in-system programming and emulator support using the AT89OCD-01 USB emulator (Figure 1)。 Powered by the USB port, the emulator and Windows software allows designers to partition memory areas and special-function registers into customizable displays. This helps designers keep visual tabs on all the important parts of the microcontroller and debug specific functions and code blocks.

声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉

评论(0)
发评论

下载排行榜

全部0条评论

快来发表一下你的评论吧 !