×

有源滤波在高负载瞬态应用

消耗积分:0 | 格式:rar | 大小:1 MB | 2017-09-12

分享资料个

  The characteristics of the DC-DC converter, the load, the electrical characteristics of the passive components, and the available PCB area all present additional design constraints that further limit the designer’s options. This task becomes more difficult if the designer is unable to begin the design with an optimized DC-DC converter, to match the transient and noise requirements. This may be due to either a lack of in-house design resource, a short design window, or the desire to use products already on their approved vendor list.In this instance a high efficiency off-the-shelf DC-DC converter may be used.
有源滤波在高负载瞬态应用

声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉

评论(0)
发评论

下载排行榜

全部0条评论

快来发表一下你的评论吧 !