资料下载
TMS320VC5509 Silicon Errata
分享资料个
The device revision can be determined by the lot trace code marked on the top of the package. The locations for
the lot trace codes for the PGE and the GHH packages are shown in Figure 1 and Figure 2， respectively. The
location of other markings may vary per device. Table 1 shows how to determine the silicon revision from the lot
trace code.
Qualified devices in the PGE package are marked with the letters “TMS” at the beginning of the device name， while
nonqualified devices in the PGE package are marked with the letters “TMX” or “TMP” at the beginning of the
device name. Similarly， qualified devices in the GHH package are marked with the letters “DV” at the beginning of
the device name， and nonqualified devices in the GHH package are marked with the letters “XDV” or “PDV” at the
beginning of the device name.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
- 相关下载
- 相关文章
