An Interleaving PFC Pre-Regulator for High-Power Converters
In higher power applications, to fully utilize the line, power factor correction (PFC) is a necessity.
Passive solutions were developed first, which required bulky inductors and capacitors. To reduce the
volume of these bulky solutions active PFC using a boost topology was developed. The active solutions
had higher power densities than the passive solutions. Interleaving PFC pre-regulators is the next step
in increasing PFC pre-regulator power densities, reducing the overall volume of the design.
Interleaving will reduce magnetic volume and has the added benefit of reducing RMS current in the
boost capacitor. This topic will evaluate the benefits of interleaving PFC pre-regulators.
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !