资料下载
×
讨论XC9500XL在系统可编程的速度
消耗积分:2 |
格式:rar |
大小:333 |
2009-05-15
tr12345
分享资料个
XC9500XL devices receive programming vectors and
instructions via the JTAG Test Access Port. During programming,
the address and data information is shifted in
first and then a programming time is initiated to imprint the
programming data into the selected flash cells. This is
repeated for all flash memory addresses within the device.
instructions via the JTAG Test Access Port. During programming,
the address and data information is shifted in
first and then a programming time is initiated to imprint the
programming data into the selected flash cells. This is
repeated for all flash memory addresses within the device.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
