×

ADS1210 ADS1211 ADS1212 ADS121

消耗积分:5 | 格式:rar | 大小:84 | 2009-06-10

131594

分享资料个

A common situation, yet undesirable condition, is to have
the input signal of an A/D converter (such as one of Burr-
Brown’s delta-sigma converters) overdrive the input stage.
A possible question that arises in this situation is “What will
the output digital code become if the analog input is
overdriven?” The differential analog input range of the
ADS1210, ADS1211, ADS1212 and ADS1213 analog-todigital
converters, shown in Figure 1, can be configured to
operate in a unipolar or bipolar mode. In the unipolar mode,
the input range is generally 5Vp-p. For bipolar operation the
input range is generally 10Vp-p.

声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉

评论(0)
发评论

下载排行榜

全部0条评论

快来发表一下你的评论吧 !