×

基于Lonworks技术的电梯控制系统的设计

消耗积分:3 | 格式:rar | 大小:119 | 2009-06-13

杜喜喜

分享资料个

电梯是现代高层建筑不可缺少的交通工具,目前多数电梯采用 PLC 控制。本文提出了一种基于Lonworks 现场总线技术的电梯控制系统的设计方法。论文先介绍了Lonworks 现场总线技术的概述,然后重点介绍了电梯控制系统的硬件组成:电梯控制系统由四部分组成。分别是电梯控制硬件模型,控制模块,LonBuilder 开发平台,本地监控机。并且编制程序调度电梯运行。实验测试达到了预期的效果。
关键词: Lonworks 技术;电梯控制模型;控制系统
Abstract: Elevator is necessary parts of an high buildings in modern times. At the present
times ,elevator is controlled by PLC .The paper introduced a design method of elevator
control system based on Lonworks field bus technology.The article introduce the
summarization of Lonworks field bus technology firstly,and emphasize the hardware
composing of elevator control system .The elevator control system is composed of
four parts.the hardware model of elevator control system,control model,LonBuilder
platform ,vicinal monitor.The elevator control system is tested by progress and
emulation result was verified.
Key words: LonWorks technology;elevator control model; control system

声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉

评论(0)
发评论

下载排行榜

全部0条评论

快来发表一下你的评论吧 !