资料下载
×
核电站辐射测量技术的检测设备研究
消耗积分:5 |
格式:rar |
大小:132 |
2009-06-15
贾虎世
分享资料个
本文通过对核电站发电原理和流程的阐述说明核电站放射性惰性气体产生的来源，以及
核辐射对人体主要敏感器官造成的躯体伤害和遗传危害。然后，介绍核辐射测量的基本原理，并对惰性气体的几种测量方法进行分析比较。在此基础上提出“在线测量”的理念，代替传统的离线测量，改进传统测量方法中的不足，并将自动控制领域的软硬件设计方法应用于核辐射测量，实现基于CAN 总线的放射性惰性气体在线测量方法的设计思路，完成该测量系统从采样到测量方法的选择，和测量仪器的刻度，并对预期需要达到的技术指标和需要改进的地方进行分析修正。
关键词:核电站 惰性气体 在线测量
Abstract:This paper studies on the measurement techniques of radioactive inert gases
emited in nuclear power plants. Through illustrating the principles of generating
electricity, we know the radioactive inert gases sources and the radioactive hazards
on human primarily sensitive organ. Then, we introduces the principles of nuclear
radiation measurement, and the measurement methods, such as ionizing room messurement
method, plastic card bodymeasurenment method, semiconductor dector method,and make
some comparison as well. In this paper ,we put forward "online survey" cocept ,
correction the shortcomings of the traditional measurement methods.For example, the
need to read out the data with other equipmen resulting in the acquisition of outcome;
Most methods can only carry on a point measurements, and materials consistency is
poor;Except for the photosensitive film mthod,the other methods are poor at spatial
resolving power.The hardware and software design method in automatic cotroll field
are applied to the field of nuclear radiation measurement,to realize the design about
radioactive inert gases measure based on CAN bus.In the paper we make the choice from
sampling methods to measure mthod and point out the technical indicators we shoud
reach.
Keywords： nuclear power plant inert gases online survey
核辐射对人体主要敏感器官造成的躯体伤害和遗传危害。然后，介绍核辐射测量的基本原理，并对惰性气体的几种测量方法进行分析比较。在此基础上提出“在线测量”的理念，代替传统的离线测量，改进传统测量方法中的不足，并将自动控制领域的软硬件设计方法应用于核辐射测量，实现基于CAN 总线的放射性惰性气体在线测量方法的设计思路，完成该测量系统从采样到测量方法的选择，和测量仪器的刻度，并对预期需要达到的技术指标和需要改进的地方进行分析修正。
关键词:核电站 惰性气体 在线测量
Abstract:This paper studies on the measurement techniques of radioactive inert gases
emited in nuclear power plants. Through illustrating the principles of generating
electricity, we know the radioactive inert gases sources and the radioactive hazards
on human primarily sensitive organ. Then, we introduces the principles of nuclear
radiation measurement, and the measurement methods, such as ionizing room messurement
method, plastic card bodymeasurenment method, semiconductor dector method,and make
some comparison as well. In this paper ,we put forward "online survey" cocept ,
correction the shortcomings of the traditional measurement methods.For example, the
need to read out the data with other equipmen resulting in the acquisition of outcome;
Most methods can only carry on a point measurements, and materials consistency is
poor;Except for the photosensitive film mthod,the other methods are poor at spatial
resolving power.The hardware and software design method in automatic cotroll field
are applied to the field of nuclear radiation measurement,to realize the design about
radioactive inert gases measure based on CAN bus.In the paper we make the choice from
sampling methods to measure mthod and point out the technical indicators we shoud
reach.
Keywords： nuclear power plant inert gases online survey
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
