资料下载
×
基于MiniGUI的智能呼吸机嵌入式应用系统实现
消耗积分:5 |
格式:rar |
大小:143 |
2009-06-17
分享资料个
本文详细介绍了如何把MiniGUI 应用于以嵌入式Linux 为操作系统的智能呼吸机中。首
先介绍了呼吸机的工作原理；接着详细介绍了如何基于MiniGUI 实现智能呼吸机中人机界面应用程序的设计思想和实现方法；最后讨论了移植MiniGUI 到核心板S3C2410 的过程。结果表明，该方案解决了以往呼吸机控制精度低、监测参数不直观的缺陷，使呼吸机的界面达到了智能美观的效果。
关键词 图形用户界面；智能呼吸机；设计；移植 ；嵌入式Linux
Abstract： This paper summarizes how to use the MiniGUI in the certain embedded
products such as Intelligent Ventilator. Firstly the working principle of
Intelligent Ventilator is given in the paper, then how to use the MiniGUI to design
the interfaces is precisely introduced, and last how to transplant the MiniGUI into
the S3C2410 is discussed. The result shows that it has well overcome the various
kinds of problems exiting in the old ventilator and so the new ventilator is
intelligent.
Key words: MiniGUI；Intelligent Ventilator；design；transplant ；Embedded Linux
先介绍了呼吸机的工作原理；接着详细介绍了如何基于MiniGUI 实现智能呼吸机中人机界面应用程序的设计思想和实现方法；最后讨论了移植MiniGUI 到核心板S3C2410 的过程。结果表明，该方案解决了以往呼吸机控制精度低、监测参数不直观的缺陷，使呼吸机的界面达到了智能美观的效果。
关键词 图形用户界面；智能呼吸机；设计；移植 ；嵌入式Linux
Abstract： This paper summarizes how to use the MiniGUI in the certain embedded
products such as Intelligent Ventilator. Firstly the working principle of
Intelligent Ventilator is given in the paper, then how to use the MiniGUI to design
the interfaces is precisely introduced, and last how to transplant the MiniGUI into
the S3C2410 is discussed. The result shows that it has well overcome the various
kinds of problems exiting in the old ventilator and so the new ventilator is
intelligent.
Key words: MiniGUI；Intelligent Ventilator；design；transplant ；Embedded Linux
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
