×

嵌入式Linux煤矿安全监控分站的设计

消耗积分:5 | 格式:rar | 大小:163 | 2009-07-30

刘杰

分享资料个

安全可靠的监控分站设计是煤矿安全监控系统设计的关键。运用源码开放、成本低、
网络支持能力强的嵌入式Linux 操作系统,在ARM 硬件平台上研究设计了基于CAN 总线的煤矿安全监控分站,不仅能连接监控设备完成监测和控制任务,挂接其它子系统,而且具有嵌入式网关功能,能实现CAN 和以太网的转换。软件设计采用多进程机制,实现了多个进程并发运行,保证了系统的安全可靠。该分站在现场应用能够满足要求,运行稳定。
关键词:分站;CAN 总线;嵌入式系统;Linux;多进程通信
Abstract:The design of safe and credible monitoring substation is the key to the
design of coal mine safety monitoring system. The safety monitoring substation of
mine based on CAN Bus is researched and designed with ARM as a hardware-platform
using open source, low cost, strong network support of embedded Linux operating
system.It not only can connect the monitoring and control device completing the task
of monitoring and control, connect with other subsystems, but also can act as an
embedded gateway and accomplish transformation between CAN and Ethernet.The design
of software adopts the multi-process mechanism,realized multiple processes working
in parallel,guaranteed the safety and credibility of the system .It runs stably
and can meet the requirements in the field application.
Key words:substation;can bus;embedded system;linux;multi-process communication

声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉

评论(0)
发评论

下载排行榜

全部0条评论

快来发表一下你的评论吧 !