资料下载
×
PS2070 pdf datasheet
消耗积分:3 |
格式:rar |
大小:555 |
2008-08-14
分享资料个
The PS2070 evaluation board is a complete charger
evaluation circuit subsystem based on the Microchip
PS200 charge controller. The board is designed to
operate with a rechargeable battery pack consisting of
lithium based, nickel based or lead acid cells. The
board includes the Microchip PS200 battery monitor IC
in a socket, a 100 mOhm sense resistor and power
components to enable charging currents to a maximum
of 2.0A.
2.0 GENERAL SETUP
The Microchip PS2070 evaluation board plugs directly
into a PowerInfo 2 interface board or PowerCal 2
calibration board. These development tools, connected
to a PC running PowerTool™ 200 (PS020) development
software, form a complete PS200 battery charger
evaluation environment. The information that follows
will guide you through the setup of the various features
available. Please refer to the PowerInfo 2 or
PowerCal 2 data sheet for information on setting up
those products.
evaluation circuit subsystem based on the Microchip
PS200 charge controller. The board is designed to
operate with a rechargeable battery pack consisting of
lithium based, nickel based or lead acid cells. The
board includes the Microchip PS200 battery monitor IC
in a socket, a 100 mOhm sense resistor and power
components to enable charging currents to a maximum
of 2.0A.
2.0 GENERAL SETUP
The Microchip PS2070 evaluation board plugs directly
into a PowerInfo 2 interface board or PowerCal 2
calibration board. These development tools, connected
to a PC running PowerTool™ 200 (PS020) development
software, form a complete PS200 battery charger
evaluation environment. The information that follows
will guide you through the setup of the various features
available. Please refer to the PowerInfo 2 or
PowerCal 2 data sheet for information on setting up
those products.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
