介绍了基于网络的家居智能监控系统的软、硬件设计方法。该系统可实现家居的火灾报警、非法入侵检测和报警等,还预留了其它报警接口。报警信号通过有线网络到小区监控中心,并通过电话网络向主人报警,也预留110报警功能。系统由单片机作为主控制器。给出系统的基本原理、组成框图和软件流程,详细描述了电话网络的接入方法和语音功能的实现。设计了系统的硬件电路,并实现了相应的软件编程。
- Abstract:
- The design of software and hardwre of an intelligent household guard and alarm system based on telephone net-work is introduced.The system implements household fire alarm,illegal intrusion detection and alarm.The system is prepared for other alarm interfaces.Alarm information is sent to community surveillance center and the owner simultaneity by telephone network.The system is prepared for110alarm function.The system uses MCU as main controller.The principle,construct block,and flow chart of the system design are given.The connecting telephone network way and voice function are described in detail.The hardware design and software programming are implemented.
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉