×

基于AD9857的信号发生器的设计

消耗积分:10 | 格式:rar | 大小:563 | 2010-12-28

张文

分享资料个

信号发生器是电路系统设计、测试的重要环节,也是电路课程相关实验的基本组成模块。现有的信号发生器硬件规模大,发生信号种类少,功能扩展需更改硬件电路,不能完全满足系统设计、测试和复杂实验需求。AD9857可工作于正交调制、单音、内插DAC等三种模式,内部集成DDS、DAC等模块,实现信号发生的基本硬件功能。对以AD9857为核心设计的基于计算机和基本硬件电路的信号发生器进行探讨,为信号发生器设计提供借鉴;为系统设计和测试,特别是为电路课程实验中信号源种类多的问题提供一种解决方案。
Abstract:
 Signal generator is not only an important part in circuit system design and test,but also the basic module in ex-periments of electric circuit course.The existing signal generators do not fully meet the system requirements of the system design,test and complex experiments,which have many defects such as more hardware scale,less kinds of signal,and more difficult expanding.AD9867works in three modes,including quadrature modulator mode,sigle-tone mode and inter-polation DAC mode.AD9867integrates DDS,DAC,it achieves basic hardware functions of signal generation.The paper dis-cusses the method of using AD9857as a core to design signal generator based on computer and basic hardware circuit,which gives not only a reference to signal generator design,but also a reference to system design and test.Especially,the design gives a resolution for multi-kinds signal resource in experiments of electric circuit course.

声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉

评论(2)
发评论
wenny0000 2012-12-26
0 回复 举报
谢谢分享,学习 收起回复
superkeshuilong 2011-08-10
0 回复 举报
谢谢分享!!! 收起回复

下载排行榜

全部2条评论

快来发表一下你的评论吧 !