PIC16F876A-I/SP
Microchip Technology
|
x 1 |
DS1307
Analog Devices Inc./Maxim Integrated
|
x 1 |
Proteus 8
|
I use PIC16F876A, DS1307, and 0.8 inch seven-segment display to make this digital clock. The firmware was written using MPLABX XC8 compiler. I separate between main board and display board. However, in Gerber file I uploaded I combine them in one sheet. I will be easy to fabricate using this PCB service.
Bill of Material.
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !