×

基于无线通信平台的监控终端设计与实现

消耗积分:0 | 格式:rar | 大小:182 | 2009-08-13

王艳

分享资料个

本文基于 AT89S52 单片机设计了一种性价比高的移动远程图像监控终端。终端在通信
协议上使用STP 协议栈。终端硬件主要包括主控部分、摄像头部分、网络传输控制部分以及GPS 定位部分。硬件设计中通过增加储能电容以及合理的PCB 布线解决了GPRS 模块数据发射中大脉冲电流干扰问题;通过增加外部看门狗保证了系统运行可靠性。
关键词: 移动视频监控系统;GPRS;单片机;PCB
Abstract: In this paper, we design one high performance Mobile Surveillance Camera at
the low cost. In the Mobile Surveillance Camera we adopt the stack based on STP
and construct with the controller, camera, the network controller and GPS receiver.
In the design of Mobile Surveillance we deal with current pulse with high value
through added capacitor and optimized the ground line distributing in PCB. In
particular, we design one watchdog circuit in order to ensure Mobile Surveillance
operation in reliable.
Keyword:Mobile Video Surveillance System; GPRS; Microcontroller ;PCB

声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉

评论(0)
发评论

下载排行榜

全部0条评论

快来发表一下你的评论吧 !