资料下载
石英晶体谐振器生产过程的统计分析技术及其应用
王超
分享资料个
摘要：作为大规模生产的电子元器件，石英晶体谐振器的生产过程不可避免的涉及到大量的统计分析。最基本的要求是统计生产过程的成品率，但我们往往可以结合数据的采集和分析同时来完成对生产过程的分析，达到对生产工艺进行监测和控制的目的。本文介绍了我们结合生产过程和特定器件，测定了石英晶体谐振器的制造特征参数，然后通过统计过程控制（Statistical Process Control, SPC）方法对每个参数作具体分析，最后确定了对产品质量有显著影响的因素。由于统计过程控制技术在电子元器件生产过程中有着广泛应用，在石英晶体谐振器生产行业也有着成功应用的经验，这一初步研究为我们改进生产过程和产品设计提供了一个有效的努力方向。
关键词：石英晶体 谐振器 统计 控制 SPC
Statistical analysis and its applications in the production process of quartz crystal resonators
Ji Wang, Jianwei Hu*, Qiyuan Li, Jiansong Liu, Jianke Du
Piezoelectric Device Laboratory, School of Engineering, Ningbo University, Ningbo, Zhejiang 315211
*Ningbo Hiking Electronic Technology Co., Ltd., 11 Qixin Road, Jiangdong District, Ningbo, Zhejiang 315051
Abstract: As electrical components of massive production, statistical analyses have been widely used in the manufacturing process. Although the essential objective is the yield analysis of production, the combination of data collection and analysis can also be an effective method for production process monitoring and control. In this paper, by measuring product parameters of quartz crystal resonators and analyzing these data with statistical process control (SPC) method, dominant factors on resonator quality are identified. Since the SPC method has wide applications in the electronic component manufacturing industry with successful outcomes, it is an important direction in the production improvement and the refinement of product design.
Key words: quartz, crystal, resonator, statistical, process, control, SPC
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
- 相关下载
- 相关文章
