This application note describes how to properly set up external and internal interrupts in anembedded hardware system. Use of an interrupt controller to manage more than one interruptis also included. The application note discusses the software use model, including initializingthe interrupt controller and peripherals, registering the interrupt handlers, and enablinginterrupts. Differences between the MicroBlazeTM and PowerPCTM processors are addressed
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉