资料下载
×
在ST7 8位微控制器的RAM中如何写入和执行汇编程序
消耗积分:5 |
格式:rar |
大小:50 |
2009-06-18
贾埃罗
分享资料个
The purpose of this document is to give some guidelines about how to write and execute assembly code in RAM with the ST7 8-bit Microcontroller.
The memory mapping in the ST72251 is shown in the following figure.
The ST7 RAM and ROM locations are addressed and read in the same way. For the ST7 core fetching and decoding instructions located either in RAM or ROM, take the same time, there is no limitation executing code in RAM.
The memory mapping in the ST72251 is shown in the following figure.
The ST7 RAM and ROM locations are addressed and read in the same way. For the ST7 core fetching and decoding instructions located either in RAM or ROM, take the same time, there is no limitation executing code in RAM.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
