资料下载
×
使用软件程序仿真C500微控制器系列SSC(同步串行通道)功
消耗积分:5 |
格式:rar |
大小:97 |
2009-07-01
5762
分享资料个
The solution presented in this paper and in the attached source files emulates the most important SSC functions by using SW routines implemented in C. The code is focused on the SAB C513, but will fit to all C500 derivatives.
Beyond the low level software drivers a test shell is delivered. This shell allows a quick test of the software drivers by an emulator or a starter kit demo board.
1 Introduction.... 3
2 General Operation and Hardware Environment 4
2.1 Supported Features... 4
2.2 Required Resources.. 5
2.3 External Routing... 6
2.4 Principles of Emulation... 7
2.4.1 Master Mode... 7
2.4.2 Slave Mode 8
3 SSC Emulation Software Description 9
3.1 Software Structure 9
3.2 Main Program 10
3.3 Emulation Subroutines . 12
3.4 Baud Rate Calculation.. 13
3.5 Load Measurement.. 14
3.6 Performance Limitations.... 15
3.7 Make File.. 16
3.8 Support of KitCON-513 Evaluation Board... 17
Beyond the low level software drivers a test shell is delivered. This shell allows a quick test of the software drivers by an emulator or a starter kit demo board.
1 Introduction.... 3
2 General Operation and Hardware Environment 4
2.1 Supported Features... 4
2.2 Required Resources.. 5
2.3 External Routing... 6
2.4 Principles of Emulation... 7
2.4.1 Master Mode... 7
2.4.2 Slave Mode 8
3 SSC Emulation Software Description 9
3.1 Software Structure 9
3.2 Main Program 10
3.3 Emulation Subroutines . 12
3.4 Baud Rate Calculation.. 13
3.5 Load Measurement.. 14
3.6 Performance Limitations.... 15
3.7 Make File.. 16
3.8 Support of KitCON-513 Evaluation Board... 17
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
