资料下载
×
基于CAN总线电子产品批量测试平台构建
消耗积分:5 |
格式:rar |
大小:141 |
2009-08-14
mintsy
分享资料个
本文构建了一种基于CAN 总线技术的电子产品批量自动测试平台，通过该平台可以利用总线技术自动完成电子产品的检测。其核心是在CAN 总线之上附加一种自动节点探测算法，这种探测算法将CAN 总线节点分为主节点和从节点，主节点将自动检测从节点，并对其进行标示。从节点在获得标示号后将自动与主节点进行测试信息交互，从而完成每个从节点上电子产品的检测。
关键词：CAN 总线，节点，探测算法
Abstract: A test platform of electronic products which based on the CAN bus technology
was constructed in this paper. As the bus technology used, this platform implemented the
electronic products test automatically. The key technology was the detection algorithm of auto node which added to the CAN bus. This algorithm divided the node of CAN bus into main node and sub-node. The main node would auto detect the sub-node, and mark it. Then the test information would be exchanged between sub-node and main node after the sub-node was marked, and the detection of the electronic products will be performed.
Key Words: CAN Bus, Node, Detection Algorithm
关键词：CAN 总线，节点，探测算法
Abstract: A test platform of electronic products which based on the CAN bus technology
was constructed in this paper. As the bus technology used, this platform implemented the
electronic products test automatically. The key technology was the detection algorithm of auto node which added to the CAN bus. This algorithm divided the node of CAN bus into main node and sub-node. The main node would auto detect the sub-node, and mark it. Then the test information would be exchanged between sub-node and main node after the sub-node was marked, and the detection of the electronic products will be performed.
Key Words: CAN Bus, Node, Detection Algorithm
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
