资料下载
×
Configuring the GC1115 for 3G
消耗积分:3 |
格式:rar |
大小:377 |
2010-07-08
分享资料个
ABSTRACT
The GC1115 crest factor reduction (CFR) processor reduces the peak-to-average ratio
(PAR) of 3G wireless signals. This application report describes how GC1115 users can
configure the device to achieve the desired peak reduction for 3G applications. In this
application report, the term 3G refers both to the UMTS (3GPP) standard and to the
cdma2000 (3GPP2) standards. Examples are provided for both air interfaces. Users of
this document need know only which air interface they are targeting, the bandwidth of
each carrier, the frequency of each carrier, and the desired output peak-to-average
ratio (PAR).
The GC1115 crest factor reduction (CFR) processor reduces the peak-to-average ratio
(PAR) of 3G wireless signals. This application report describes how GC1115 users can
configure the device to achieve the desired peak reduction for 3G applications. In this
application report, the term 3G refers both to the UMTS (3GPP) standard and to the
cdma2000 (3GPP2) standards. Examples are provided for both air interfaces. Users of
this document need know only which air interface they are targeting, the bandwidth of
each carrier, the frequency of each carrier, and the desired output peak-to-average
ratio (PAR).
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
