×

基于TinyOS的CC2430无线数据收发设计

消耗积分:10 | 格式:rar | 大小:620 | 2011-01-04

李伟

分享资料个

为解决现有CC2430无线数据收发程序代码量庞大,结构不清晰,关键源码不公开等问题,提出一种基于TinyOS的CC2430无线数据收发设计方案。在分析CC2430性能的基础上,设计一种基于DMA的节点收发机制,配置DMA的源和目的地址寄存器、数据长度寄存器以及触发模式寄存器,并根据DMA操作流程给出数据发送和接收流程图。基于TinyOS的组件结构,给出了包括DMA数据收发、简单MAC协议、定时器和串口的组件配置文件。编译结果表明该方法结构简单,占用RAM为11字节,占用程序空间少于7KB。在CC2430节
Abstract:
 A novel communication mechanism was designed to solve the shortcomings in existing programs.including huge code size,comples code sonstruction,invisible key codes and so on.After a general introducing of the features of CC2430,a communication mechanism based on DMA and its flow chars were illustrated.Registers about DMA were configured in de-tail.The components in TinyOS include communication module,timer module,MAC module and UART module were designed as well.Compilation shows that this mechanism occupies only11Bytes of RAM and less than7K Bytes of ROM.The exper-iment on CC2430illustrates that node can transmit to and receive from its neighbor accurately in all kinds of data rates.

声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉

评论(0)
发评论

下载排行榜

全部0条评论

快来发表一下你的评论吧 !