×

用CS51227电压模式PWM控制器设计的112W升压转换器

消耗积分:0 | 格式:rar | 大小:424 | 2009-05-31

王尚岱

分享资料个

This design note describes the design and operating
characteristics of a 112 W Boost Converter based on the
CS51227 Enhanced Voltage Mode PWM Controller. The
design discussed herein converts an input voltage range of
10–18 VDC to 28 VDC at an output current of 4.0 A.
• 1.0 MHz Frequency Capability
• Low Voltage Start–Up
• Undervoltage Lockout (UVLO)
• Low Start–Up Current
• Thermal Shutdown
• 1.0 A Source/Sink Gate Drive
• Pulse by Pulse Current Limiting with Leading Edge Blanking
• Programmable Volt–Second Clamp

声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉

评论(0)
发评论

下载排行榜

全部0条评论

快来发表一下你的评论吧 !