The ML8953 is a 3-axis accelerometer based on the piezo-resistive sensing principle and that provides data output in a digital format.
The internal logic circuitry consists of a MCU with embedded Flash ROM, and by supporting both I2C and SPI interface to host controller, the ML8953 flexibly addresses customer needs in terms of connectivity. The internal MCU offers several features that allow taking much of operational load off the customer’s host controller. The internal Flash ROM is used also to store factory calibration data, taking the additional calibration steps off the customer’s manufacturing line.
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部1条评论
快来发表一下你的评论吧 !