This audio IC was developed for notebook PCs and allows major reduction of amp circuit board area. (To conform to PC98, includes built-in speaker drive amp, headphone amp, line amp. stereo/monaural switching,DC voltage control electronic volume, watchdog, logic control function.)
Applications
(1) Notebook PC audio control
Features
(1) Speaker amp: Stereo BTL output 0.7W (when VCC = 5.0V, RL = 8½)
(2) Electronic volume control (-60 ~ +20dB). THD = 0.5% (when POUT = 300mW, RL = 8½)
THD1 = 0.5% (when VOUT = 100mVrms, RL = 16½)
THD2 = 0.1% (when VOUT = 1VmVrms, RL = 10k½)
(4) Line amp: Mixes 4 inputs ( 2ch signals and outputs on 3 outputs ( 2ch. Stereo/monaural switching
possible on one line. THD = 0.1% (when VOUT = 1Vrms, RL = 10k½)
(5) Microphone amp: Switch pin selects 1 of 4 inputs
(6) Logic control: Speaker, headphone and line amp (including microphone amp and mix amp) logic
controllable. Current consumption 300μA during power save mode.
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !