本文在介绍了模块化生产加工系统(MPS)结构和功能的基础上,着重阐述了应用WinCC组态软件与WinAC软PLC改造MPS的方法,监控主机(PC)运行软PLC作为主站与MPS各工作单元PLC从站进行通信,构成分布式控制网络;通过组态软件创建动态监控界面,实现对MPS工作过程的实时监控。
关键词:组态软件、软PLC、模块化生产加工系统
中图分类号:TP273 文献标示码:B
Application of WinCC and WinAC in Reforming Modular Production System
Author:SUN Shu-wen, TIAN Yue, ZHANG Jian
(College of Mechanical Engineering & Applied Electronics Technology, Beijing University of Technology, Beijing 100124, China)
Abstract: This article introduces the structures and functions of the modular productions system (MPS). It emphasis on how to the MPS is reformed based on configuration software and SoftPLC. The SoftPLC is studied and realized on the platform of monitor host computer. Via PROFIBUS, the master computer and PLC slave nodes can communicate with each other directly, like a distributed network. This paper introduces configuration of HMI, steps of realizing monitoring and control production process.
Keywords:configuration software、SoftPLC、modular production system
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !