资料下载
×
低成本在线可编程四电源定序器
消耗积分:0 |
格式:rar |
大小:33 |
2009-05-27
訾存贵
分享资料个
In this application, an X80141 provides comparators,internal references and delay circuits to simply control sequencing of multiple DC to DC converters. In this design, a dual digitally controlled potentiometer (DCP) provides adjustment to the thresholds of two low voltage supplies. This allows the power supplies to be trimmed,either up or down, while maintaining a desirable undervoltage margin. A block diagram appears in Figure 1. The X80141 provides undervoltage thresholds for each of the monitored inputs, while the X93256 provides threshold adjustment. The X80141 internal thresholds and adjustable
ranges are shown in Table 1. For larger or smaller power distribution schemes, Xicor offers dual, triple and quad sequencers/supervisors.
ranges are shown in Table 1. For larger or smaller power distribution schemes, Xicor offers dual, triple and quad sequencers/supervisors.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
