资料下载
×
基于CAN总线的分布式控制网络智能节点的设计
消耗积分:5 |
格式:rar |
大小:107 |
2009-06-12
小组店小二
分享资料个
现场总线是目前自动化技术发展的一个热点。本文介绍基于CAN 总线的分布式控制网络系统的设计方法，给出了Intel 80C196KC+SJA1000 和PIC16F877+MCP2510两种典型的CAN总线智能节点的硬件电路和软件初始化程序。
关键词：现场控制网络 CAN 总线 SJA1000 MCP2510
Abstract: Field Bus is the hotspot of automation technology recently. This paper introduces the design of Distributed Control Network System Based on CAN Bus and presents the hardware circuits and software initial programs of two typical intelligent nodes, Intel 80C196KC+SJA1000 and PIC16F877+MCP2510.
Keywords: fieldcontrol network CAN Bus SJA1000 MCP2510
关键词：现场控制网络 CAN 总线 SJA1000 MCP2510
Abstract: Field Bus is the hotspot of automation technology recently. This paper introduces the design of Distributed Control Network System Based on CAN Bus and presents the hardware circuits and software initial programs of two typical intelligent nodes, Intel 80C196KC+SJA1000 and PIC16F877+MCP2510.
Keywords: fieldcontrol network CAN Bus SJA1000 MCP2510
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
