资料下载
×
基于ARM9的电力智能终端通信软件设计
消耗积分:3 |
格式:rar |
大小:121 |
2009-06-13
王强
分享资料个
本文采用目前广泛应用的工业以太网为通讯方式，提出以ARM9 开发板和 MIZI Linux
嵌入式操作系统为平台的通信设计方案。在掌握ARM9 和 MIZI Linux 特点的基础上，构建MIZI Linux 嵌入式操作系统下应用程序的软硬件开发平台。本方案采用DM9000 芯片来控制以太网，在实现通讯模块调用的基础上，进行Linux 下的Socket 网络通信编程，实现智能终端的以太网通信功能。
关键词：智能终端；以太网；MIZI Linux 嵌入式操作系统
Abstract: The design scheme based on ARM9 development board and MIZI Linux embedded
operation system was given according to the character of intelligent terminals. The software andhardware development platform of MIZI Linux embedded operation system was built. The
terminal used the DM9000 chip to control Ethernet communication. After the communication
module was used successfully, socket network program was programmed in Linux. Then the
intelligent terminal’s Ethernet communication function was realized.
Keywords: intelligent terminal; Ethernet; MIZI Linux Embedded OS
嵌入式操作系统为平台的通信设计方案。在掌握ARM9 和 MIZI Linux 特点的基础上，构建MIZI Linux 嵌入式操作系统下应用程序的软硬件开发平台。本方案采用DM9000 芯片来控制以太网，在实现通讯模块调用的基础上，进行Linux 下的Socket 网络通信编程，实现智能终端的以太网通信功能。
关键词：智能终端；以太网；MIZI Linux 嵌入式操作系统
Abstract: The design scheme based on ARM9 development board and MIZI Linux embedded
operation system was given according to the character of intelligent terminals. The software andhardware development platform of MIZI Linux embedded operation system was built. The
terminal used the DM9000 chip to control Ethernet communication. After the communication
module was used successfully, socket network program was programmed in Linux. Then the
intelligent terminal’s Ethernet communication function was realized.
Keywords: intelligent terminal; Ethernet; MIZI Linux Embedded OS
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
