资料下载
×
机械加工过程中实时质量监测系统的开发
消耗积分:3 |
格式:rar |
大小:125 |
2009-06-15
万物死
分享资料个
本文以WinCE 嵌入式操作系统和微处理器ARM 为核心，设计了一种机械零件加工过程中嵌入式实时质量监测系统。论文介绍了系统的设计方案、系统组成以及硬件驱动程序设计和应用程序设计等关键技术问题。通过实验证明，该系统可以实现对机械零件加工过程的质量的实时动态监测。
关键词： WinCE; ARM; 实时质量监测
Abstract: In this paper an embedded real time quality supervising system in mechanical element process is presented using WinCE and MCU ARM as the core of the system. Discusses the design scheme, system stack and several important technical problems, such as hardware drivers design and application programs design. Experiments indicate the system implements the quality of real time dynamic supervising in mechanical element process.
Keywords: WinCE; ARM; real time quality supervising
关键词： WinCE; ARM; 实时质量监测
Abstract: In this paper an embedded real time quality supervising system in mechanical element process is presented using WinCE and MCU ARM as the core of the system. Discusses the design scheme, system stack and several important technical problems, such as hardware drivers design and application programs design. Experiments indicate the system implements the quality of real time dynamic supervising in mechanical element process.
Keywords: WinCE; ARM; real time quality supervising
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
