资料下载
×
某模拟训练器信号采集和通信接口设计与实现
消耗积分:3 |
格式:rar |
大小:116 |
2009-08-15
罗星
分享资料个
提出了某武器系统一种射击训练模拟器系统结构，设计了射击训练模拟器信号采集和通信专用接口，并利用C++Builder 平台采用通信控件MSCOMM 编写了上位机通信程序，利用C 语言编写了下位机通信程序。通过RS232 总线实现了单片机与PC 机的通信。实现了某武器系统训练模拟器操作手训练过程信号的采集和通信。
关键词：训练模拟器；MSCOMM 控件；串行通信；专用接口。
Absrract: This paper presented a kind of certain weapon system to train simulator construction of system .The signal collection and communication interface for
special purpose was designed.. In C + + Builder platform ,with communication
control MSCOMM ,the communication program between personal computer and
single chip was compiled. Through RS232 bus line, the communication of single
chip and personal computer were realized. At the same time , certain weapon
system to train simulator operating hand the course of communication and the
collection of signal were realized.
Keywords: Training simulator; MSCOMM controls; serial communication;
signal interface
关键词：训练模拟器；MSCOMM 控件；串行通信；专用接口。
Absrract: This paper presented a kind of certain weapon system to train simulator construction of system .The signal collection and communication interface for
special purpose was designed.. In C + + Builder platform ,with communication
control MSCOMM ,the communication program between personal computer and
single chip was compiled. Through RS232 bus line, the communication of single
chip and personal computer were realized. At the same time , certain weapon
system to train simulator operating hand the course of communication and the
collection of signal were realized.
Keywords: Training simulator; MSCOMM controls; serial communication;
signal interface
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
