资料下载
×
基于Artix-7 50T FPGA开发板的近距离感应器Pmod设计示例
消耗积分:0 |
格式:rar |
大小:未知 |
2016-08-03
分享资料个
基于Artix-7 50T FPGA开发板的近距离感应器Pmod设计示例（Vivado 2014.4 - Proximity Sensor Pmod Example Design）。
This document describes a simple MicroBlazeTM design implemented and tested on the Xilinx Artix-7 50TEvaluation board. This example design integrates the Maxim MAX44000PMB1 proximity sensor
peripheral module (Pmod) with a custom Pulse Width Modulator (PWM) peripheral to manipulate the brightness of LEDs on the board.
This document describes a simple MicroBlazeTM design implemented and tested on the Xilinx Artix-7 50TEvaluation board. This example design integrates the Maxim MAX44000PMB1 proximity sensor
peripheral module (Pmod) with a custom Pulse Width Modulator (PWM) peripheral to manipulate the brightness of LEDs on the board.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
