Designing a single-stage filter is straightforward. The inductor
is selected to give about 20% current ripple, and the
capacitor is chosen with sufficiently low ESR to meet the
output ripple requirements. The output holdup and step-load
requirements also impact the choice of capacitor.
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !