×

如何设计高效抗干扰的无线通信协议

消耗积分:0 | 格式:rar | 大小:0.11 MB | 2017-09-18

分享资料个

  This application note describes the low-level Frequency Agility Protocol for nRF24XX. This

  is a protocol that gives protection against disturbing traffic from frequency stationary systems

  like WLAN and frequency hopping devices like Bluetooth.

  The protocol is generic and can be used in many different systems that require resistance

  against disturbance from other systems. By using this protocol, a system can operate in close

  proximity with systems using different WLAN channels, 2,4GHz cordless phones, 2,4GHz

  remote controls, microwave ovens, Bluetooth devices and other proprietary 2,4GHz systems.

  Basing its functionality on recovery by retransmission of lost packets, it will be much more

  reliable than a uni-directional communication protocol.

  This document describes the assumptions that the protocol is based on, a description of the

  functionality, implementation described with state machine diagrams, current consumption

  calculations and C-code examples.

如何设计高效抗干扰的无线通信协议

声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉

评论(0)
发评论

下载排行榜

全部0条评论

快来发表一下你的评论吧 !