资料下载
×
Agilent Technologies E5346A 38
消耗积分:2 |
格式:rar |
大小:492 |
2010-08-21
分享资料个
The 38-pin probe and adapter cable provide a convenient way to
connect two Agilent Technologies logic analyzer probe cables to a small
area of a target system. The Agilent TechnologiesE5346A probe has
RCR isolation networks in the cable end that connects to the 38-pin
AMP MICTOR (Matched Impedance ConnecTOR) connector. The
Agilent Technologies E5351A adapter cable does not have isolation
networks, so isolation networks must be provided on the target system.
connect two Agilent Technologies logic analyzer probe cables to a small
area of a target system. The Agilent TechnologiesE5346A probe has
RCR isolation networks in the cable end that connects to the 38-pin
AMP MICTOR (Matched Impedance ConnecTOR) connector. The
Agilent Technologies E5351A adapter cable does not have isolation
networks, so isolation networks must be provided on the target system.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
