资料下载
×
LTM4606 pdf datasheet (Ultralo
消耗积分:5 |
格式:rar |
大小:335 |
2009-01-13
张虎豹
分享资料个
The LTM®4606 is a complete ultralow noise high voltage
6A switching mode DC/DC power supply. Included in the
package are the switching controller, power FETs, inductor,
and all support components. The on-board input fi lter and
noise cancellation circuits achieve low noise operation, thus
effectively reducing the electromagnetic interference (EMI).
Operating over an input voltage range of 4.5V to 28V, the
LTM4606 supports an output voltage range of 0.6V to 5V,
set by a single resistor. This high effi ciency design delivers
6A continuous current (8A peak). Only bulk input and
output capacitors are needed to fi nish the design.
High switching frequency and an adaptive on-time current
mode architecture enables a very fast transient response
to line and load changes without sacrifi cing stability. The
device supports output voltage tracking and output voltage
margining.
6A switching mode DC/DC power supply. Included in the
package are the switching controller, power FETs, inductor,
and all support components. The on-board input fi lter and
noise cancellation circuits achieve low noise operation, thus
effectively reducing the electromagnetic interference (EMI).
Operating over an input voltage range of 4.5V to 28V, the
LTM4606 supports an output voltage range of 0.6V to 5V,
set by a single resistor. This high effi ciency design delivers
6A continuous current (8A peak). Only bulk input and
output capacitors are needed to fi nish the design.
High switching frequency and an adaptive on-time current
mode architecture enables a very fast transient response
to line and load changes without sacrifi cing stability. The
device supports output voltage tracking and output voltage
margining.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
