资料下载
×
应用嵌入式系统实现溶氧测量温度补偿
消耗积分:3 |
格式:rar |
大小:444 |
2009-01-17
duke刘
分享资料个
摘要结合嵌入式系统BL2100 的优点，从电极的工作原理出发，对不具备温度补偿功能的溶氧变送器进行了软件温度补偿。试验结果表明，采用软件温度补偿的溶氧测量值可以达到与METTLER - TOLEDO 溶氧变送器相近的效果，从而证明了该方法的有效性。
关键词溶解氧温度补偿嵌入式系统
Abstract Combining with the advantages of embedded system BL2100 and based on the operational principle of electrode，temperature compensation is
implement by software for dissolved oxygen transmitter of which the function of temperature compensation in not offered by itself. The experiments result
show that the result obtained by software compensation for DO values can reach the same level provided by METTLER - TOLEDO dissolved oxygen transmitter，
thus the effectiveness of this method has been proven.
Keywords Dissolved oxygen Temperature compensation Embedded system
关键词溶解氧温度补偿嵌入式系统
Abstract Combining with the advantages of embedded system BL2100 and based on the operational principle of electrode，temperature compensation is
implement by software for dissolved oxygen transmitter of which the function of temperature compensation in not offered by itself. The experiments result
show that the result obtained by software compensation for DO values can reach the same level provided by METTLER - TOLEDO dissolved oxygen transmitter，
thus the effectiveness of this method has been proven.
Keywords Dissolved oxygen Temperature compensation Embedded system
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
