×

PCI Express External Cabling S

消耗积分:5 | 格式:rar | 大小:333 | 2009-04-06

王艳

分享资料个

This document covers external cabling solutions for PCI Express. Its purpose is to define
electromechanical specifications for the complete interconnect, including cables and cable
connectors. Some of the projected usage models for such solutions are:
5 Expansion I/O
Split-system desktop
Tethered docking for mobile platforms
External graphics controllers
The focus of this document is on copper-based cabling. Optical-based solutions might be covered in
10 subsequent revisions.
Other than providing signaling compliant with the PCI Express Base Specification, and any erratea
thereof that might exist, this cable specification makes no assumptions as to the source and
destination thereoff. For instance, a source could be the Root Complex, Switch or other PCI
Express device and the destination could be a Switch, end-point or other PCI Express compliant
15 device. Contained within this specification are the cable, connector and board side requirements for
providing a reliable cabled PCI Express solution.

声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉

评论(0)
发评论

下载排行榜

全部0条评论

快来发表一下你的评论吧 !