Universal Serial Bus Mass Storage Specification For Bootability
1 Introduction
When personal computers and similar devices are powered up, they typically load and begin executing the main operating system from a mass storage device such as a disk drive. This specification defines a set of commands and associated data sufficient to allow the loading of an operating system stored on a USB Mass Storage Class device.
1.1 Scope
This specification fully defines the minimum required set of CDBs and Data a USB Mass Storage device must implement in order for a host to boot from it. The commands defined herein are taken from other industry command set specifications. Some of these specifications conflict with each other in minor details.
The command definitions in this specification resolve the applicable conflicts.
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !