本文首先介绍Linux 系统设备驱动的特点,然后以S3C2410 平台为硬件开发环境,
实现了Linux2.6.14 系统下LCD 显示设备的驱动,其中包括如何将LCD 驱动程序添加到Linux内核配置系统中。
[Abstract] This article introduced the characteristic of Linux device driver, then accomplish
LCD device driver in embedded Linux2.6.14 system based on the s3c2410 platform.The article
also illustrated how to compile the LCD driver module.
关键字: 嵌入式Linux,S3C2410 平台,帧缓存,设备驱动
Keywords: Embedded Linux, S3C2410 platform, Framebuffer, Device driver
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !