资料下载
×
用EEPOT实现电源和DC变换器的控制
消耗积分:3 |
格式:rar |
大小:32 |
2009-05-27
王树林
分享资料个
The output voltage of power supplies and DC to DC converters is regulated by dividing down the output,comparing it with a stable reference, amplifying the
error, and then using this error signal to control the input to output power transfer. Many applications use an expensive and unreliable mechanical
potentiometer in the divider to precisely set the outputvoltage, as shown in Figure 1.
error, and then using this error signal to control the input to output power transfer. Many applications use an expensive and unreliable mechanical
potentiometer in the divider to precisely set the outputvoltage, as shown in Figure 1.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
