×

基于ARM的数据采集系统硬件部分实现

消耗积分:10 | 格式:rar | 大小:183 | 2009-05-27

韩刚龙

分享资料个

本文详细的阐述了基于ARM 处理器的数据采集系统硬件部分的设计与实现。整个硬件
电路分成两个部分:主控电路部分和数据采集部分。在主控电路部分,我们完成了主芯片设计、存储器电路、串口电路、网络电路的设计。在数据采集部分,我们完成了信号调理电路、滤波器电路、A/D 转换电路、D/A 转换电路的设计。最后给出了系统硬件调试方法。
关键字: ARM 处理器;数据采集;电路设计;
Hardware Design of Data Acquisition System based on ARM Processor WANG Xiao-rong, HE Xiao-song, ZHU Yong-rong (Chongqing University, Chongqing 400030; Chongqing Technological Institute, Chongqing, 401331) Abstract: The hardware design and implementation of an embedded network multichannel data acquisition are described in this paper. The hardware circuit is consisting of two parts: master control circuit and data acquisition circuit. In the first part, it concludes master controller design, memory circuit, serial port circuit, and network circuit; in the second part, the signal modifying circuit, filter circuit, A/D and D/A transfer circuit are designed. At last, the hardware debug strategy of the system is introduced.
Keywords: ARM Processor; Data Acquisition; Circuit Design

声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉

评论(0)
发评论

下载排行榜

全部0条评论

快来发表一下你的评论吧 !