×

车载DVD伺服控制系统软件设计与实现

消耗积分:10 | 格式:rar | 大小:171 | 2009-05-30

申换换

分享资料个

本文在介绍车载DVD 伺服控制系统的构成和设计原理的基础上,针对车载DVD伺服系统要求高精度、抗震动、快速响应的特点,采用了台湾ALI 公司生产的高度集成的DVD 驱动器专用伺服控制芯片M5705,并介绍了基于M5705 的嵌入式系统软件设计和车载DVD伺服系统应用软件的具体实现,并重点介绍了车载DVD 的伺服系统应用软件的设计。
关键词:车载DVD,伺服系统,嵌入式系统开发,M5705
Software Design and Implement of Vehicle Mounted DVD Servomechanism Wang Hui1, Liu Jinxing2, Bao Kejin1 (1. Jiangsu University, 2. Jiangsu University of Science and Technology ) Abstract: This article described the design principle and the constitution of the Vehicle mounted DVD servo system at the beginning, for the sake of the Vehicle mounted DVD servo system requires high precision, aseismatic and rapid response characteristics, this
paper adopted appropriative servo chip M5705,which integrated highly, and introduced to design embedded system software and applied software of Vehicle mounted DVD servo system based on the M5705, and pay important attention to applied software of the Vehicle mounted DVD servo system.
Keywords: Vehicle Mounted DVD;Servomechanism; Embedded system design; M5705

声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉

评论(0)
发评论

下载排行榜

全部0条评论

快来发表一下你的评论吧 !