×

基于ARM的船舶现场监控模块的设计

消耗积分:3 | 格式:rar | 大小:174 | 2009-06-22

李艳

分享资料个

通过对监控模块的功能分析,选择Samsung 公司的ARM7 微处理器S3C44B0X 作为核心进
行硬件设计,进行了启动代码Boot Loader 的编写和操作系统的移植。μC/OS-II 没有给驱动程序提供统一的标准接口,本设计中采用了驱动程序抽象层的方法自定义接口,通过指向不同驱动子程序的函数指针,为操作系统挂载驱动程序。
关键词:嵌入式系统,船舶监控,Boot Loader 开发,操作系统移植
Abstract: In this text I accomplished the design of hardware, the core of which is Samsung Company’s 32-digit embedded microprocessor–S3C44BOX, and drew the principle picture of the hardware. The writing of the startup code and the transplantation of μC/OS-II operating system have been systemically discoursed on at great length. Have adopted the self-defining interface of the method of abstract layer of the driver in this design. Through point to different driver, mount the driver in for the operating system.
Key Words: Embedded System; Shipping Monitoring and Control; Boot Loader Development; Transplantation of Operating System

声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉

评论(0)
发评论

下载排行榜

全部0条评论

快来发表一下你的评论吧 !