×

M68000用户手册补充说明

消耗积分:3 | 格式:rar | 大小:38 | 2009-06-24

旧念

分享资料个

Page Description
2-5 Table 2-1 Notes. Change “CP = Program Counter” to “PC = Program Counter”.
5-17 The 2-wire bus arbitration in Figure 5-18 is incorrect and should be replaced by the following figure.
11-1 Replace the table following paragraph 11.1. with the following table.
Page Description
11-4 In Figure 11-3 68-Lead Quad Pack (1 of 2). Pins 13 and 14 are labeled
incorrectly. Pin 13 should be labeled BR not BGACK. Pin 14 should be
VCC not BR.
11-5 In Figure 11-3 68-Lead Quad Pack (2 of 2). Pin 31 is labeled incorrectly.
Pin 31 should be labeled A0 not NC.
11-7 In Figure 11-6. 64-Lead Quad Flat Pack. Add FU Suffix after 64-Lead Quad
Flat Pack.
11-7 Replaced Figure 11-6 with the following figure .
11-10 Figure 11-9. Delete this figure. The LC Package is no longer available.

声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉

评论(0)
发评论

下载排行榜

全部0条评论

快来发表一下你的评论吧 !