资料下载
×
嵌入式系统中触摸屏交互功能模块设计
消耗积分:3 |
格式:rar |
大小:158 |
2009-08-14
golabs
分享资料个
本文以ARM920T 内核的S3C2410 芯片GX 开发板为硬件平台，采用 WindowsCE 操作系统，设计了嵌入式系统触摸屏交互功能模块。并对有关技术问题做了分析与讨论。
关键字：嵌入式;Windows CE;交互设计
Abstract: This paper take the S3C2410 chip GX development plank which contain
ARM920T kernel as the hardware terrace, adopting the Windows CE OS , carrying
out the design for the mutual function of the touching screen. At last, we analysis
and discuss the relevant technique problem.
Keywords: Embedded ;Windows CE; mutual design
关键字：嵌入式;Windows CE;交互设计
Abstract: This paper take the S3C2410 chip GX development plank which contain
ARM920T kernel as the hardware terrace, adopting the Windows CE OS , carrying
out the design for the mutual function of the touching screen. At last, we analysis
and discuss the relevant technique problem.
Keywords: Embedded ;Windows CE; mutual design
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
