资料下载
×
AD8601/AD8602/AD8604,pdf datas
消耗积分:5 |
格式:rar |
大小:296 |
2009-08-29
张艳
分享资料个
The AD8601, AD8602, and AD8604 are single, dual, and quad
rail-to-rail input and output single-supply amplifiers featuring very
low offset voltage and wide signal bandwidth. These amplifiers
use a new, patented trimming technique that achieves superior
performance without laser trimming. All are fully specified to
operate on a 3 V to 5 V single supply.
The combination of low offsets, very low input bias currents,
and high speed make these amplifiers useful in a wide variety of
applications. Filters, integrators, diode amplifiers, shunt current
sensors, and high impedance sensors all benefit from the combination
of performance features. Audio and other ac applications
benefit from the wide bandwidth and low distortion. For the
most cost-sensitive applications, the D grades offer this ac performance
with lower dc precision at a lower price point.
Applications for these amplifiers include audio amplification for
portable devices, portable phone headsets, bar code scanners,
portable instruments, cellular PA controls, and multipole filters.
The ability to swing rail-to-rail at both the input and output
enables designers to buffer CMOS ADCs, DACs, ASICs, and
other wide output swing devices in single-supply systems.
rail-to-rail input and output single-supply amplifiers featuring very
low offset voltage and wide signal bandwidth. These amplifiers
use a new, patented trimming technique that achieves superior
performance without laser trimming. All are fully specified to
operate on a 3 V to 5 V single supply.
The combination of low offsets, very low input bias currents,
and high speed make these amplifiers useful in a wide variety of
applications. Filters, integrators, diode amplifiers, shunt current
sensors, and high impedance sensors all benefit from the combination
of performance features. Audio and other ac applications
benefit from the wide bandwidth and low distortion. For the
most cost-sensitive applications, the D grades offer this ac performance
with lower dc precision at a lower price point.
Applications for these amplifiers include audio amplification for
portable devices, portable phone headsets, bar code scanners,
portable instruments, cellular PA controls, and multipole filters.
The ability to swing rail-to-rail at both the input and output
enables designers to buffer CMOS ADCs, DACs, ASICs, and
other wide output swing devices in single-supply systems.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
