System Name: PMSM34
File Name: PMSM3_4.C
Description: Primary system file for the Real Implementation of Position Control
Based Sensored Field Orientation Control for a Three Phase Permanent-
Magnet Synchronous Motor (PMSM) using QEP sensor
Originator: Digital control systems Group - Texas Instruments
Note: In this software, the default inverter is supposed to be DMC550 board.
=====================================================================================
History:
-------------------------------------------------------------------------------------
04-15-2005 Version 3.20: Support both F280x and F281x targets
04-25-2005 Version 3.21: Move EINT and ERTM down to ensure that all initialization
is completed before interrupts are allowed.
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !