资料下载
S参数的设计与应用
郝埃连
分享资料个
Agilent AN 154 S-Parameter Design Application Note S参数的设计与应用
The need for new high-frequency, solid-state circuit
design techniques has been recognized both by microwave
engineers and circuit designers. These engineers
are being asked to design solid state circuits
that will operate at higher and higher frequencies.
The development of microwave transistors and
Agilent Technologies’ network analysis instrumentation
systems that permit complete network characterization
in the microwave frequency range
have greatly assisted these engineers in their work.
The Agilent Microwave Division’s lab staff has
developed a high frequency circuit design seminar
to assist their counterparts in R&D labs throughout
the world. This seminar has been presented
in a number of locations in the United States and
Europe.
From the experience gained in presenting this original
seminar, we have developed a four-part video
tape, S-Parameter Design Seminar. While the technology
of high frequency circuit design is ever
changing, the concepts upon which this technology
has been built are relatively invariant.
The content of the S-Parameter Design Seminar is
as follows:
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
-
ffcuu
2017-08-02
0 回复 举报感谢分享 收起回复
- 相关下载
- 相关文章
